Model Marine Supplies - 01803 400 827


Our products


Home » RADIO Gear. Futaba- Fittings etc.

 Checkout

« Previous | 1 | 2 | »

CABLE tie wraps

Details 

Nylon cable tie wraps (small)
Price: 0.75
Add to cart

RADIO BOX  (NEW)

Details 

Upgraded Radio box from previous version, VERY strong  plastic with bolt down lid, built in rubber seal, 2 bellows, all screws, nuts, screw in cap for radio switch or charging and servo tray for 2 standard size servos. The best radio box we have seen, with very strong main body.  Lid is 150mm x 150mm, body is 128mm x 128mm and 65mm deep including cover.

Fits between 5" rails,

Price: 23.95
Add to cart

 

Details 

12" (300mm) x 3mm threaded push rod
Price: 1.65
Add to cart

AEROMARINE Fibreglass (Deep Vee) Radio box-1

Details 

A strong fibreglass moulded radio box. This one is designed for use in deep vee's and slopes from 65mm at the back to 50mm deep at the front. Allowing for the use of a 1/4 scale servo and two standard size servos to be stood upright. The box measures 4.65 x 5.5" and comes with a plexi glass lid which sits in a lip around the top internal edge. The box is also available in a shallower design where heigth is limited and allows the servos to be laid on their side.
Another lid is available for use with "D" rubber section to seal the lid down, add an extra £3.50 for this version"
Price: 20.95
Out of Stock

 

Details 

Steel pushrod 2mm diameter 200mm long. with one end threaded 2mm
Price: 0.75
Add to cart

 

Details 

DUBRO 12" Steel push rod with 4-40 threaded quicklink clevis connector at one end
Price: 2.50
Add to cart

 

Details 

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 5.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
A larger lid is available for use with "D" rubber section to seal the lid down using screws, add an extra £3.50 for this version"
Price: 20.95
Add to cart

 

Details 

A strong MEDIUM sized fibreglass moulded radio box. This one is designed for use in shallow hulls such as the sprintcats, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 6.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
Price: 21.95
Add to cart

 

Details 

 A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 7.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
Price: 22.95
Add to cart

5994 Kavan Ball link extender 3mm

Details 

Extender link for 3mm ball link for joining 3mm Kavan ball link to 3mm push rod.
Price: 0.70
Add to cart

 

Details 

Heavy duty ball link for 3mm threaded rods
Price: 2.95
Add to cart

AEROMARINE Radio box/Fuel tank PLUG

Details 

Radio box rubber bung also suitable for saddle Tanks..
Price: 4.95
Add to cart

AEROMARINE RADIO BOX TAPE 72yards

Details 

AEROMARINE 3M Waterproof radio box tape for use with tape down lids. The best you can get. does not leave a sticky residue on removal. 
Price: 19.95
Add to cart

Dubro  EZ Adjustable heavy duty ball joint
Previous1 of 2Next

Details 

The DU-BRO E/Z/ Adjust Ball Links are heavy duty with a adjustable ball joint clamp
Price: 4.95
Add to cart

RADIO box rubber bellows (2)

Details 

Radio box brubber ballows (2)
Price: 1.55
Add to cart

SERVO MOUNTING BRACKETS

Details 

The easy way to install your standard size servo into the radio box. Servo lugs slide into the brackets once they have been secured onto the side or bottom of the box. For mounting all standard size servos. Very secure.
Price: 2.46
Out of Stock

RADIO box rubber bellow with Ali top hat (2)

Details 

Rubber bellows with aluminium base part. Pack of 2..  
Price: 4.95
Add to cart

AEROMARINE 1/4 scale servo tray CLEARANC/SPECIAL OFFER

Details 

Aeromarine aluminium servo tray for 1/4 scale servos measuring, 66.0 x 30.0 x 57.0mm. Easily mount your servos upright or lay down with these strong, aircraft aluminum trays. also available for standard size servos. SAVE £5.00 on NSP £10.95
Price: 5.95
Add to cart

RADIO box rubber bellows (2)

Details 

Radio box rubber bellows for radio linkages. (2).A new improved type, very good quality.
Price: 2.98
Add to cart

 

Details 

"D" section radio box closed cell sealing foam. Stick down with cyno glue
Price: 3.99
Out of Stock

RADIO BOX SEALING RUBBER "flat"

Details 

Neoprene self adhesive closed cell sealing foam to seal screw down radio box lids etc.. 5mm x 12mm x 950mm long.
Price: 4.95
Add to cart

RADIO BOX Waterproof switch & harness

Details 

Waterproof switch mount, & switch with harness for futaba, JR, Hitec, Mpx etc. Ideal for radio box or radio compartment. The operating rod and the fixing nut have o-ring seals.
Price: 14.95
Add to cart

FAILSAFE  Waterproof

Details 

MTronics Waterproof micro single channel failsafe for use with 4 and 5 cell receiver packs. Easy push button setup. Duel operation LED's. Low voltage sensing.
Price: 10.99
Out of Stock

RADIO BOX Waterproof switch with harness

Details 

Waterproof radio box toggle switch with rubber toggle cap and seal. saves having to open your radio box to switch on.
Price: Please call
Out of Stock

FUTABA Switch Harness (Heavy Duty)

Details 

Futaba/ heavy duty wired switch harness with charge lead. 300mm
Price: 6.95
Add to cart

Futaba/JR/Hitec HD switch harness with clip

Details 

Futaba HD switch harness with plug retaining clip and charge lead
Price: 6.95
Add to cart

 

Details 

Aeromarine Aerial assembly. Reciever aerial feeds up through a nylon tube
Price: 4.45
Add to cart

STAINLESS WHIP AERIALS

Details 

Stainless steel removable aerial with solder clip for receiver wire.
Price: 3.99
Out of Stock

EXTENTION AERIAL FOR 2.4GHz

Details 

400mm Extension aerial for Futaba FASST, Hitec  receivers. Just plug in.

£3.99 each
Price: 3.99
Add to cart

VOLTSPY2 Battery checker

Details 

A must for your radio box battery.
Dont loose control, keep a check on the battery state. Battery checker switchable for 4.8v/6v battery packs.
Price: 7.95
Add to cart

« Previous | 1 | 2 | »



 

Home
Products
Categories
Search
Contact Us

 Login Status

Not logged in

» Login

Search

Shopping cart
0 Product(s) in cart
Total 0.00
» Checkout

Home | Products | Categories | Search | Shopping Cart | Contact Us
Copyright ©2012 - Hosted by UK Prime.