Model Marine Supplies - 01803 400 827


Our products


Home » BH.HANSON/ZENOAH Products

 Checkout

« Previous | 1 | 2 | 3 | »

 
ZENOAH ENGINES
 
Zenoah engines are at present in short supply from Japan due to the limited operation of their factory. Our next supply is due in late November for the 260 and 300 engines.
Price: Please call
Add to cart

"BHHANSON" High Performance products

Details 

We now have the dealership in the UK for the distribution of BHHANSON products.

Engines, upgrade kits, exhausts, spares etc

Price: Please call
Add to cart

BHHANSON  "PRO MOD" ZENOAH G260

Details 

THE Hanson G260 Pro Modified engine is one of Hansons most popular engines. Modifications include lightweight piston, increased compression, enlarged exhaust, intake and transfer ports, increased intake and exhaust timings, a balanced flywheel, recoil ring, big bore WT257 carb .
A balanced and trued crankshaft, bearing set for crankshaft end play and low drag seals can be fitted for an extra £25.95

Price: £495.00
Add to cart

ZENOAH G260PUM Marine Engine

Details 

The Zenoah G260 Marine is a powerfull and reliable petrol engine straight out of the box and ready to go. Fitted with a twin needle Walbro 644 carburettor its performance is quite outstanding for a petrol engine.
Price: £245.00
Add to cart

ZENOAH G300PUM Marine 29.5cc

Details 

Zenoah 300PUM 29.5cc NEW with 36mm bore piston and the EZ pullstarter to make starting much easier and quicker. plus1048 carb.
Price: £295.00
Add to cart

BHHANSON, Zenoah 300, 29.5cc PRO MOD

Details 

 SPECIAL OFFER, Normal selling price (£515.00)
(Cancelled customer order).
Hansons most powerful Zenoah engine producing 5.9HP @ 17,000 rpm, with 5HP still being produced@ 18,000rpm. Engine will be customer set timing, depending on your application. Engine has 1mm stroker crankshaft,  M-cut lightweight piston with increased compression, enlarged inlet & exhaust port race timed, extensive transfer port modifications, trued & balanced crankshaft with bearings set for end play with low drag seals, bored out and bell mouthed 257 or 1048 carb. and balanced flywheel
As the engines are custom made delivery is approx. 2 weeks from the States.
Price: £460.00
Add to cart

ZENOAH G320PUM Marine

Details 

PRICE REDUCTION.<
ZENOAH 320PUM; . This latest engine has a new crankshaft/connecting rod combination, two bearings on the flywheel side and a new output side seal. It is the latest upgraded version with the stronger crankshaft assembly. A very powerfull engine with everything you would expect from Zenoah. Engine is fitted with electonic ignition, a big bore 1048 carb and the EZ pullstart for easier starting
Price: £325.00
Add to cart

BHHANSON ZENOAH G310UMP Marine Pro Mod

Details 

The latest upgrade to the Zenoah 300. .
ZENOAH 310 2+2 Pro Mod with 2mm Stroker Crank 30.5cc 1048 carb, all Zenoah parts. .
Modifications Include: Adjusted Intake & Exhaust Timing, Enlarged Exhaust & Intake Window Areas, Enlarged Transfer Ports, M-Cut Lightweight Piston & Balanced Flywheel.
Add 1027 walbro modified carb inplace of 1048  +£25.00
Price: £595.00
Add to cart

BHHANSON  ZENOAH G340PUM Marine

Details 

NEW BH Hanson Pro Mod 340 PUM Zenoah 34cc with 2.0mm stroker crank, lightened piston, modified exhaust and intake port and timing, compression increase, head modification, modified  Carb.
Price: £665.00
Add to cart

 
ZENOAH Pullstart
 
Zenoah complete recoil pullstart and housing
Price: £28.15
Add to cart

ZENOAH EZ Pullstart

Details 

Genuine Zenoah EZ pullstart. A much easier to use pullstart than the standard recoil drive dog one fitted to marine engines. Comes with all parts required to easily fit, Complete instructions sheet included.
Price: £44.95
Add to cart

BHHanson 230-300 Clutch assembly

Details 

BH_Hanson_Clutch This new clutch comes with a billet housing and a ventilated metal clutch bell. It's supplied with Zenoah clutch shoes, clutch housing, all mounting hardware and Aeromarine collett with your choice of round or square drive. The clutch is designed to be used with one of our clutch mounts or any mount using the Zenoah bolt pattern.
Price: £139.95
Add to cart

BHHanson 320 Clutch assembly

Details 

BH_Hanson_Clutch for G320 This new clutch comes with a billet housing and a ventilated metal clutch bell. It's supplied with Zenoah clutch shoes, clutch housing, all mounting hardware and Aeromarine collett with your choice of round or square drive. The clutch is designed to be used with one of our clutch mounts or any mount using the Zenoah bolt pattern.
Price: £139.95
Add to cart

BHHanson Header 90deg. 2" offset

Details 

BHHanson 90 degree Aluminum header,  with 2" elbow offset..
Price: £25.95
Add to cart

ENGINE Mount Bobbin (Large, USA) 25 x 18mm

Details 

Heavy duty male/female bobbin 1" x 3/4" as used in the BHHAnson mount and many of the American engine mounts with unc. threads.  A very strong bobbin ideal for petrol engine mounts. Complete with stainless steel nut, washers and bolt."
Price: £3.95
Add to cart

260-300 Exhaust gasket (1)

Details 

Exhaust flange gasket
Price: £1.78
Add to cart

 

Details 

Spare 3.5mm x 22mm i.d. Orange silicone "O" rings to fit all of the the 22mm watercooled headers plus tuned pipes..
Price: £1.00
Add to cart

 

Details 

Genuine Tygon petrol fuel tubing which stays flexible, 3.2mm bore
Price: £3.50
Add to cart

COOLING ring for 22mm. header

Details 

22mm I.D. cooling ring to give extra cooling to the aluminum manifold, complete with brass water nipples and sealing O rings.



Ideal for all 22mm Headers,
Price: £21.95
Add to cart

ZENOAH S/s GAS Tuned pipe, 26cc

Details 

23 to 30cc Stainless steel W/c silenced tuned pipe and watercooled sliding coupler. Pipe length is adjustable. 15.5" long and can be fitted inside many mono hulls when using the deep V space saver header. Fits over 22mm / 7/8" exhaust header.
Price: £65.95
Add to cart

 
BHHANSON, Zenoah 230 to 300 Quick release mount
 
BHHANSON, Zenoah 230 to 300 Quick release mount without integral throttle linkage
Price: £53.95
Add to cart

BHHANSON, Zenoah 230 to 300 Quick release mount

Details 

BHHanson Zenoah modified quick release mount with integral bracket complete with throttle linkage

BHHanson mounts are constructed of 5/32 6061 T6 aluminum and are virtually indestructible,  These mounts are light weight and are designed with the racer in mind. They are water jet cut and mandrel formed with a generous radius bend for additional strength.   The mount top is open for accurate coil gap adjustment at the lake and the recoil side hole is sized so the Zenoah EZ pull recoil pulley will clear when it is shortened allowing the recoil to be mounted directly to the mount plate without spacers.  The mount rubber durometer is specified by us for rigidity while still allowing good vibration absorption.  All parts are proudly made in the U.S.A.
Price: £58.95
Add to cart

WATER PUMP only

Details 

Water pump for petrol engines fitted with a clutch. Ensures water cooling at all times
Price: £44.95
Add to cart

BHHANSON, ZENOAH 320 Quick release mount

Details 

 

Quick change mount for Zenoah 320 PUM
Quick change mount complete with isolation rubbers, throttle linkage with carburetor arm and mounting hardware.
Price: £58.95
Add to cart

WATER PUMP Isolation carb block 260-300

Details 

Modified carb Iso block for use with a water pump with pressure nipple fitted  correctly.
Price: £18.95
Add to cart

 

Details 

Stainless steel WTC 22mm Header.
Allows the exhaust to be brought to the centre of the boat
Price: £12.95
Add to cart

WATER PUMP & Carb Iso block

Details 

Zenoah water pump complete with piping and Iso Block. A must for engines fitted with a clutch but can be used without a clutch being fitted. Water is being circulated at all speeds.

Needs to have the modified carb Isolation block with a pressure nipple fitted
Price: £59.95
Add to cart

NO LEAK HEADER ADAPTOR

Details 

CS62 NO LEAK exhaust flange. CNC aluminium watercooled flange that does not allow the possibility of a water leak into the exhaust gas and is machined so that the viton o-rings stay in position. Fits most 22mm 7/8" header pipes and includes one set of viton o-rings..
Price: £17.95
Add to cart

BHHANSON Carb control cable

Details 

Control cable to operate carburettor lever
Price: £19.95
Out of Stock

FUEL FILTER Dubro (Large)

Details 

Dubro Hi Flow large fuel filter for petrol or glow
Price: £5.85
Add to cart

« Previous | 1 | 2 | 3 | »



 

Home
Products
Categories
Search
Contact Us

 Login Status

Not logged in

» Login

Search

Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout

Home | Products | Categories | Search | Shopping Cart | Contact Us
Copyright ©2012 - Hosted by UK Prime.