Our products

Engine coupling Stainless steel 1/4unf. to 3/16" flex cable

Speedmaster Electic motor  coupling 6mm to 1/4"

 AEROMARINE Electic motor  coupling 6mm to 3/16"

Electric motor coupling for 1/8" shaft to .150" (3.8mm) cable

A motor coupling for a 5/32"  smooth shaft to .098" flexi cable

OCTURA Electric motor coupling for 5mm smooth motor shaft connecting to .062 (1/16") wire drive system.

Also available for 1/8" motor shaft to .062" wire drive"

OCFHE18098 Hardened plated steel electric motor collet coupling for connecting a 1/8" smooth motor shaft ie. 540 type motor to .098" flexi cable.

OCFHE1813 hardened plated steel electric motor collet coupling for connecting a 1/8" motor shaft, ie. 540 type motor to .130" (3.2mm) flexi cable

OCFHE4MM13 Case hardened steel coupling for connecting a 4mm plain motor shaft to .130 (3.2mm) cable"

OCFH4MM15 hardened plated steel flexi coupling for connecting a motor with a 4mm smooth shaft to .150 (3.6mm) flexi cable."

OCTURA 5mm plain motor shaft to .078" (2mm) wire drive

OCFHE5MM13S Short, Electric motor coupling for 5mm smooth shaft to .130" flexi cable.

OCFHE5MM13L Hardened plated steel, Long motor collet coupling for 5mm smooth shaft to .130" (3.2mm) flexi cable.

OCFHE5MM15S,
Coupling for connecting 5mm plain shaft to .150 Octura cable only.

OCTURA 5mm plain shaft motor coupling to connect to .150" cable. (Long body)

OCFHE5MM18 Two piece heavy duty twin grub screw hardened plated steel coupling for coupling a 5mm plain shaft to 3/16 (.187") flexi cable."

OCFH5MM13 5mm threaded coupling to .130"  flexi cable for use with the small .12 - .18 glow engines.

OCFHE6MM18 6mm plain coupling to .187 cable for use on gearboxes & motors with 6mm output shafts"

OCFH5MM15. Threaded 5mm coupling to .150" (3.8mm) flexi cable for use with the .12 to .18 Glow engines."

Octura hardened steel 2 part coupling for 6mm motor shaft to 1/4" cable

OCTURA hardened steel 2 part coupling for 6mm threaded motor shaft to 3/16" flexi cable

OCTURA electric motor coupling for an 8mm plain motor shaft to 3/16 cable"

OCTURA 1/4"-28unf. (.250") threaded hardened plated steel motor collet coupling, connecting to .130" flexi cable.

OCTURA 8mm plain shaft coupling with 2 grub screws to connect to 1/4" cable

OCFH1415 1/4"-28unf. threaded hardened plated steel, two part coupling for connecting to .150 (3.6mm) flexible cable

OCTURA 1/4"unf threaded coupling to connect 3/16 cable

OCTURA OCFHE1413 Two part twin grub screw, hardened plated steel 1/4" smooth shaft coupling connecting to .130"  (3.2mm) flexi cable.

OCTURA OCFH1425 with spigot, case hardened flex coupling for engine shaft 1/4unf to 1/4" cable.

OCTURA 1/4" plain shaft to .150"  (3.8mm) cable

OCTURA 5/16"unf.  threaded coupling to 3/16" flexi cable